HRC55 4Flutes Uncoated T-Slotting Cutter For Aluminum Alloy
- group name
- Aluminum End Mills
- Min Order
- 1 piece
- brand name
- MSUTOOLS
- model
- D1mm-20mm
- Nearest port for product export
- Any ports of China
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW
- Acceptable payment methods
- T/T, L/C, Credit Card, PayPal, Westem Union
- update time
- Thu, 05 Aug 2021 22:32:12 GMT
Paramtents
Material Solid Carbide
Internal Cooling Without
No of Cutting Flute 4 Flutes
Type Flattened
Coating Uncoated
Cutting Direction Right - Hand
Helix Angle 35°
Precision ±0.01
Workpiece Aluminum/ Copper Alloys/Heat-resistant alloys/Plas
Application Milling
Cutting Diameter 1mm-20mm
Full Length 50mm/75mm/100mm/150mm
Packging & Delivery
-
Min Order1 piece
Briefing
Detailed
|
Description
|
HRC55 4Flutes Uncoated T-Slotting Cutter For Hard Tungsten Steel And Alloy Aluminum
|
||
|
Hardness
|
HRC58
|
||
|
Coating
|
Uncoated
|
||
|
Helix Angle
|
35°
|
||
Workpiece | Aluminum/ Copper Alloys/Heat-resistant alloys/Plastics | ||
Application | Side Milling and Face Milling/Slotting | ||
1. Special Cutting Edge: Special cutting edge can increase the cutting. The lifetime of tools and machines will be longer. 2. U shape design:can be suitable for big feed machining. 3. Smooth And Wide Flute: Smooth and wide flute will remove the cuttings more easily. 4. Heat-resistant Coating: With highly heat-resistant HELICA coating, can be used for high-speed processing 5. DLC Coating: can increase lifetime 2-3 times longer 6. High Quality Raw Material: The raw material is used of high toughness, grain-sized carbon tungsten 7. Polished Surface Treatment: With high polished surface treatment, reduce the friction coefficient could be reduced, the lathe efficiency could be improved, more production time could be saved | |||
